HOT DIPPED GALVANIZED HEXAGONAL MESH GABIONS BEFORE WEAVE
Mesh Type: Hexagonal mesh
Mesh size: 5x7cm, 6x8cm, 8x10cm, 8x12cm, 10x12cm etc.
Gabion size: as per request of customers.
The normal : 1.5x1x1m
2x1x1m
3x1x1m
2x1x0.5m
4x1x1m
3x2x0.23m
4x2x0.23m
...
Gabions
Gabions are used in many situations including the stabilization of earth movement and erosion, river control, reservoirs, canal refurbishment, landscaping and retaining walls. They can be manufactured in welded mesh or woven wire. Welded mesh gabions are faster to erect and do not need tensioning. This allows them to keep their shape, to be free from bulges and depressions and fit easily against the wall. It is possible to cut holes in them if needed to pass pipes etc through and they can be machine filled.
The woven wire mesh can either be Galmac (95% Zinc 5% Aluminium Mischmetal Alloy) coated mild steel or Galmac coated with an additional PVC coating if required. Galmac has significantly improved corrosion resistance to zinc in both chemical and physical terms. This technology when applied to steel wire products provides up to about three times greater protection per unit coating mass, than do zinc coatings.
PVC coated units are recommended in River or fluvial conditions where abrasive sediments may exist, marine conditions, mining applications, where soil is highly acidic or alkalinic or where an extended design life is required.
Advantages:
(1). Economic, just a stone can be sealed into the cage.
(2). Easy construction, no special technology.
(3). Have a very strong withstand natural damage and corrosion resistance and resistance to weather impacts.
(4). Can withstand a wide range of deformation, but not collapse.
(5). Between the stones is beneficial to plant production of sludge can be fused with the surrounding natural environment as a whole.
(6). Has a good permeability, to prevent the hydrostatic damage.
|
Specifiedsize(mm)
|
Diameter of wire (mm)
|
Inside Diameter/Outside Diameter(mm)
|
Max Wide Cut(m)
|
|
60X80
|
φ 2.0-2.8
|
φ 2.0/3.0-2.8/3.8
|
4.3
|
|
80X100
|
φ 2.2-3.2
|
φ 2.2/3.2-3.0/4.0
|
4.3
|
|
80X120
|
φ 2.2-3.2
|
φ 2.2/3.2-3.0/4.0
|
4.3
|
|
100X120
|
φ 2.4-3.5
|
φ 2.4/3.4-3.2/4.2
|
4.3
|
|
100X150
|
φ 2.4-3.5
|
φ 2.4/3.4-3.2/4.2
|
4.3
|
|
120X150
|
φ 2.7-4.0
|
φ 2.7/3.7-3.5/4.5
|
4.3
|
|
Note: PVC coated hexagonal wire diameter up to 4.0mm, maximum 4.5mm wire edge
|
